The following is excerpted from the metadata provided by IDEM, OLQ for the source shapefile SEPTAGE:
"This dataset consists of Septage Sites - permitted septage (septic tank waste) sites where the waste is land applied, as defined by 327 IAC 7, 327 IAC 7-6, and 327 IAC 7-7 of the Indiana Administrative Code."
"This data set contains the locations of access points to managed sites, along with a unique identifier for each location. In a few instances other features were used as a reference for the location of the managed sites. Also included are method, accuracy, description codes (metadata) for each entry."
This data set is provided by Indiana University, Indiana Geological Survey, and contains data believed to be accurate; however, a degree of error is inherent in all data. This product is distributed "AS-IS" without warranties of any kind, either expressed or implied, including but not limited to warranties of suitability of a particular purpose or use. No attempt has been made in either the designed format or production of these data to define the limits or jurisdiction of any federal, state, or local government.
These data are intended for use only at the published scale or smaller and are for reference purposes only. They are not to be construed as a legal document or survey instrument. A detailed on-the-ground survey and historical analysis of a single site may differ from these data.
CREDIT
It is requested that the Solid Waste Compliance Section, Compliance and Response Branch, Office of Land Quality, Indiana Department of Environmental Management be cited in any products generated from this data. The following source citation should be included: [WASTE_SEPTAGE_SITES_IDEM_IN: Septage Waste Sites in Indiana (Indiana Department of Environmental Management, Point Shapefile), 2013].
WARRANTY
Indiana University, Indiana Geological Survey warrants that the media on which this product is stored will be free from defect in materials and workmanship for ninety (90) days from the date of acquisition. If such a defect is found, return the media to Publication Sales, Indiana Geological Survey, 611 North Walnut Grove, Bloomington, Indiana 47405-2208, and it will be replaced free of charge.
LIMITATION OF WARRANTIES AND LIABILITY
Except for the expressed warranty above, the product is provided "AS IS", without any other warranties or conditions, expressed or implied, including, but not limited to, warranties for product quality, or suitability to a particular purpose or use. The risk or liability resulting from the use of this product is assumed by the user. Indiana University, Indiana Geological Survey shares no liability with product users indirect, incidental, special, or consequential damages whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or economic loss. Indiana University, Indiana Geological Survey is not responsible for claims by a third party. The maximum aggregate liability to the original purchaser shall not exceed the amount paid by you for the product.
The following is excerpted from the metadata provided by IDEM, OLQ for the source shapefile SEPTAGE:
"All attributes created during the process were verified by displaying the lines in the database and verifying consistency. However, no formal tests were performed. Therefore accuracy cannot be guaranteed or verified. Omissions or null values in certain fields is due to the fact that edits were made in the data dictionary (adding or deleting attribute information) as the project progressed, information was unknown or mistakenly left out, or the field with the ommission was not relative to the method used to collect the data."
"This data set consists of locations of Septage Sites within the state of Indiana. This dataset is incomplete and a work in progress, as sites are GPS'd as they are inspected. This dataset contains information that represents what had been recorded, processed, and archived by IDEM personnel at a time previous to publication. However the data set may be incomplete and/or inaccurate due to the ever-changing status of managed facilities and sites, and due to the data collection and processing efforts of IDEM staff. It is an ever-changing work in progress. Data were collected by the Solid Waste Compliance section within the Office of Land Quality, Indiana Department of Environmental Management. The Section was also responsible for collecting attribute information for each location. The data has been QA/QC'd for consistency but no formal tests were performed on accuracy. Therefore accuracy cannot be guaranteed or verified. Omissions or null values in certain fields is due to the fact that edits were made in the data dictionary (adding or deleting attribute information) as the project progressed, information was unknown or mistakenly left out, or the field with the ommission was not relative to the method used to collect the data."
"The data were collected with a GPS GIS-mapping system. The accuracy of the coordinates should be from 1-5 meters, depending upon the type of GPS instrument used, the collection environment (ie., multipath, SNR, and PDOP), and the number of positions logged for each location. However, this accuracy cannot be guaranteed or verified. Each GPS unit should have been configured within the specifications of the manufacturer. However, if necessary, the field personnel would configure the unit outside of specifications if environmental conditions warranted. Accuracy was checked by logging both Maximum PDOP and the standard deviations of the positional average of each location collected. If maximum PDOP value was > 6, the value for the "In_specs" field was input as "NO". If the standard deviation was > 8, the corrected GPS file was analyzed for signs of multipath and/or outliers, and edited accordingly. It was then re-exported to the archive. If the data set was uneditable it was still left in the archive. The "In-specs" field was changed to "No" and the location could have an accuracy > 5 meters.
If the environmental conditions of the collection session fell within the acceptable ranges for data collection as defined by the technical specifications of the instrument used and specific instrument configuration, then the accuracy of the collected coordinates should be within those values as given by the manufacturer. The GeoExplorer Unit has an accuracy range of 2 to 5 meters (post-processed), the GeoExplorer 3 and 3c a range of 1 to 5 meters (post-processed), and the Pro XR has a range of .50 cm - 1m differential accuracy to real-time differential correction.
If the environmental conditions and/or technical configurations were not met, then the values could exceed those given by the manufacturer."
"The vertical accuracy for GPS data collection can be two to three times less accurate than horizontal accuracy. The vertical accuracy for these locations could have up to 15 meters of error. However, this accuracy cannot be guaranteed or verified. Height above Ellipsoid values have been recorded, but it is strongly suggested that the values not be used for any analysis.
Due to the nature of how these values are derived in the GPS data collection process, the error variable is large enough to make the coordinate values unuseable in any type of locational analysis."
No changes in this dataset were apparent from the last update date on October 20, 2009 so only the metadata was edited to reflect this information. No changes to the WASTE_SEPTAGE_SITES_IDEM_IN.SHP were made.
It is requested that the Solid Waste Compliance Section, Compliance and Response Branch, Office of Land Quality, Indiana Department of Environmental Management be cited in any products generated from this data. The following source citation should be included: [WASTE_SEPTAGE_SITES_IDEM_IN: Septage Waste Sites in Indiana (Indiana Department of Environmental Management, Point Shapefile), 2013].
WARRANTY
Indiana University, Indiana Geological Survey warrants that the media on which this product is stored will be free from defect in materials and workmanship for ninety (90) days from the date of acquisition. If such a defect is found, return the media to Publication Sales, Indiana Geological Survey, 611 North Walnut Grove, Bloomington, Indiana 47405-2208, and it will be replaced free of charge.
LIMITATION OF WARRANTIES AND LIABILITY
Except for the expressed warranty above, the product is provided "AS IS", without any other warranties or conditions, expressed or implied, including, but not limited to, warranties for product quality, or suitability to a particular purpose or use. The risk or liability resulting from the use of this product is assumed by the user. Indiana University, Indiana Geological Survey shares no liability with product users indirect, incidental, special, or consequential damages whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or economic loss. Indiana University, Indiana Geological Survey is not responsible for claims by a third party. The maximum aggregate liability to the original purchaser shall not exceed the amount paid by you for the product.
"DISCLAIMER OF WARRANTIES
THE INDIANA DEPARTMENT OF ENVIRONMENTAL MANAGEMENT (IDEM), ITS EMPLOYEES, SUCCESSORS OR ASSIGNS MAKE NO REPRESENTATIONS OR WARRANTIES ABOUT THE COMPLETENESS, SUITABILITY, RELIABILITY, AVAILABILITY AND ACCURACY OF DATA, SOFTWARE, INFORMATION OR SERVICES PROVIDED.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY INFORMATION RETRIEVED FROM OR DELIVERED TO AN INDIVIDUAL OR ENTITY THROUGH THE AUSPICES OF IDEM ARE PROVIDED "AS IS" AND INCLUDES ALL FAULTS WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND. THE RECIPIENT, OF THE DATA, SOFTWARE, INFORMATION OR SERVICES, ACKNOWLEDGES AND AGREES THAT IT HAS RECEIVED ADEQUATE NOTICE THAT USE OF THE DATA, SOFTWARE, INFORMATION OR SERVICES IS AT RECIPIENTS OWN RISK.
IDEM AND OR ITS RESPECTIVE SUPPLIERS HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE AFOREMENTIONED MATERIAL, INCLUDING WARRANTIES OF MERCHANTABILITY, TITLE, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS OF RESPONSES, RESULTS, LACK OF NEGLIGENCE OR LACK OF WORKMANLIKE EFFORT, QUIET ENJOYMENT, QUIET POSSESSION, AND CORRESPONDENCE TO DESCRIPTION. FURTHER THE ABOVE LIST OF DISCLAIMED WARRANTIES IS NOT EXHAUSTIVE AS ANY AND ALL WARRANTIES AND CONDITIONS ARE DISCLAIMED. THE ENTIRE RISK ARISING OUT OF THE USE OF OR PERFORMANCE OF THE DATA, SOFTWARE, INFORMATION OR SERVICES IS BORNE BY THE RECIPIENT.
EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL IDEM OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR: LOSS OF PROFITS, LOSS OF CONFIDENTIAL OR OTHER INFORMATION, BUSINESS INTERRUPTION, PERSONAL INJURY, LOSS OF PRIVACY, FAILURE TO MEET ANY DUTY (INCLUDING GOOD FAITH AND REASONABLE CARE), NEGLIGENCE, AND ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER, ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OR INABILITY TO USE, THE DATA, SOFTWARE, INFORMATION OR SERVICES, EVEN IF THE RECIPIENT IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. RECIPIENT'S SOLE REMEDY IS TO DISCONTINUE THE USE OF THE DATA, SOFTWARE, INFORMATION OR SERVICES."