This data set is provided by Indiana University, Indiana Geological Survey, and contains data believed to be accurate; however, a degree of error is inherent in all data. This product is distributed "AS-IS" without warranties of any kind, either expressed or implied, including but not limited to warranties of suitability of a particular purpose or use. No attempt has been made in either the designed format or production of these data to define the limits or jurisdiction of any federal, state, or local government.
These data are intended for use only at the published scale or smaller and are for reference purposes only. They are not to be construed as a legal document or survey instrument. A detailed on-the-ground survey and historical analysis of a single site may differ from these data.
CREDIT
It is requested that the Indiana Geological Survey be cited in any products generated from this data set. The following source citation should be included: [INTERSTATES_TIGER_IGS_IN: Interstate Highways in Indiana, Derived from TIGER Files (U.S. Census Bureau, 1:100,000, Line Shapefile)].
Acknowledgment of the U.S. Census Bureau would be appreciated for products derived from these files. TIGER, TIGER/Line, and Census TIGER are registered trademarks of the U.S. Census Bureau. ZCTA is a trademark of the U.S. Census Bureau.
Please acknowledge AVENZA Systems Inc. for shapefile conversion.
WARRANTY
Indiana University, Indiana Geological Survey warrants that the media on which this product is stored will be free from defect in materials and workmanship for ninety (90) days from the date of acquisition. If such a defect is found, return the media to Publication Sales, Indiana Geological Survey, 611 North Walnut Grove, Bloomington, Indiana 47405-2208, and it will be replaced free of charge.
LIMITATION OF WARRANTIES AND LIABILITY
Except for the expressed warranty above, the product is provided "AS IS", without any other warranties or conditions, expressed or implied, including, but not limited to, warranties for product quality, or suitability to a particular purpose or use. The risk or liability resulting from the use of this product is assumed by the user. Indiana University, Indiana Geological Survey shares no liability with product users indirect, incidental, special, or consequential damages whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or economic loss. Indiana University, Indiana Geological Survey is not responsible for claims by a third party. The maximum aggregate liability to the original purchaser shall not exceed the amount paid by you for the product.
U.S. Census Bureau requests "Acknowledgment of the U.S. Census Bureau would be appreciated for products derived from these files. TIGER, TIGER/Line, and Census TIGER are registered trademarks of the U.S. Census Bureau. ZCTA is a trademark of the U.S. Census Bureau."
AVENZA Systems Inc. is acknowledged for shapefile conversion.
"Accurate against Federal information Processing Standards (FIPS), FIPS Publication 6-4, and FIPS-55 at the 100% level for the codes and base names. The remaining attribute information has been examined but has not been fully tested for accuracy."
"The feature network of lines (as represented by Record Types 1 and 2) is complete for census purposes. Spatial objects in TIGER/Line belong to the "Geometry and Topology" (GT) class of objects in the "Spatial Data Transfer Standard" (SDTS) FIPS Publication 173 and are topologically valid. Node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological edit requirements. These requirements include:
* Complete chains must begin and end at nodes.
* Complete chains must connect to each other at nodes.
* Complete chains do not extend through nodes.
* Left and right GT-polygons are defined for each complete chain element and are consistent throughout the extract process.
* The chains representing the limits of the files are free of gaps.
The Census Bureau performed automated tests to ensure logical consistency and limits of files. All polygons are tested for closure. The Census Bureau uses its internally developed Geographic Update System to enhance and modify spatial and attribute data in the Census TIGER data base. Standard geographic codes, such as FIPS codes for states, counties, municipalities, and places, are used when encoding spatial entities. The Census Bureau performed spatial data tests for logical consistency of the codes during the compilation of the original Census TIGER data base files. Most of the Codes themselves were provided to the Census Bureau by the USGS, the agency responsible for maintaining FIPS 55. Feature attribute information has been examined but has not been fully tested for consistency."
The following is excerpted from the U.S. Census Bureau, TIGER metadata:
"Data completeness of the TIGER/Line files reflects the contents of the Census TIGER data base at the time the TIGER/Line files (Census 2000 version) were created."
"The information present in these files is provided for the purposes of statistical analysis and census operations only. Coordinates in the TIGER/Line files have six implied decimal places, but the positional accuracy of these coordinates is not as great as the six decimal places suggest. The positional accuracy varies with the source materials used, but generally the information is no better than the established national map Accuracy standards for 1:100,000-scale maps from the U.S. Geological Survey (USGS); thus it is NOT suitable for high-precision measurement applications such as engineering problems, property transfers, or other uses that might require highly accurate measurements of the earth's surface. The USGS 1:100,000-scale maps met national map accuracy standards and use coordinates defined by the North American Datum, 1983. For the contiguous 48 States, the cartographic fidelity of most of the Census 2000 TIGER/Line files, in areas outside the 1980 census Geographic Base File/Dual Independent map Encoding (GBF/DIME) file coverage and selected other large metropolitan areas, compare favorably with the USGS 1:100,000-scale maps. The Census Bureau cannot specify the accuracy of features inside of what was the 1980 GBF/DIME-File coverage or selected metropolitan areas. The Census Bureau added updates to the TIGER/Line files that enumerators annotated on maps sheets prepared from the Census TIGER data base as they attempted to traverse every street feature shown on the Census 2000 map sheets; the Census Bureau also made other corrections from updated map sheets supplied by local participants for Census Bureau programs. The locational accuracy of these updates is of unknown quality. In addition to the Federal, State, and local sources, portions of the files may contain information obtained in part from maps and other materials prepared by private companies. Despite the fact the TIGER/Line data positional accuracy is not as high as the coordinate values imply, the six- decimal place precision is useful when producing maps. The precision allows features that are next to each other on the ground to be placed in the correct position, on the map, relative to each other, without overlap."
"In order for others to use the information in the Census TIGER data base in a GIS or for other geographic applications, the Census Bureau releases periodic extracts of selected information from the Census TIGER data base, organized as topologically consistent networks. Software (TIGER DB routines) written by the Geography Division allows for efficient access to Census TIGER system data. TIGER/Line files are extracted from the Census TIGER data base by county or statistical equivalent area. Census TIGER data for a given county or statistical equivalent area is then distributed among 17 fixed length record ASCII files, each one containing attributes for either line, polygon, or landmark geographic data types. The Census Bureau has released various versions of the TIGER/Line files since 1988, with each version having more updates (feature and feature names, address ranges and ZIP Codes, coordinate updates, revised field definitions, etc.) than the previous version." "TIGER/Line files are created and processed in a VMS environment. The environment consists of two Alpha Server 8400s clustered together running OpenVMS version 6.2-1H3 used for production operations. The Census TIGER system is driven by DEC Command language (DCL) procedures which invoke C software routines to extract selected geographic and cartographic information (TIGER/Line files) from the operational Census TIGER data base."
It is requested that the Indiana Geological Survey be cited in any products generated from this data set. The following citation should be included: INTERSTATES_TIGER_IGS_IN: Interstate Highways in Indiana, Derived from TIGER Files (U.S. Census Bureau, 1:100,000, Line Shapefile), Indiana Geological Survey, 2003.
WARRANTY
Indiana University, Indiana Geological Survey warrants that the media on which this product is stored will be free from defect in materials and workmanship for ninety (90) days from the date of acquisition. If such a defect is found, return the media to, Publication Sales, Indiana Geological Survey, 611 North Walnut Grove, Bloomington, IN 47405-2208, and it will be replaced free of charge.
LIMITATION OF WARRANTIES AND LIABILITY
Except for the expressed warranty above, the product is provided "AS IS", without any other warranties or conditions, expressed or implied, including, but not limited to, warranties for product quality, or suitability to a particular purpose or use. The risk or liability resulting from the use of this product is assumed by the user. Indiana University, Indiana Geological Survey shares no liability with product users indirect, incidental, special, or consequential damages whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or economic loss. Indiana University, Indiana Geological Survey is not responsible for claims by a third party. The maximum aggregate liability to the original purchaser shall not exceed the amount paid by you for the product.