NOTE -- An updated version of this dataset was provided to Indiana Geological Survey personnel on June 25, 2012 from personnel of the U.S. Department of Agriculture, Natural Resources Conservation Service.
NOTE -- Since June 25, 2012, data and metadata for selected counties may have been revised by personnel of the NRCS. For the most current data, users should refer to the Indiana Soils Program Web page of the NRCS, <http://www.in.nrcs.usda.gov/mlra11/soils.html>
"This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetrically correct base and digitizing, or by revising digitized maps using remotely sensed and other information.
"This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties."
"SSURGO depicts information about the kinds and distribution of soils on the landscape. The soil map and data used in the SSURGO product were prepared by soil scientists as part of the National Cooperative Soil Survey."
This data set was compiled by Indiana University, Indiana Geological Survey, using data believed to be accurate; however, a degree of error is inherent in all data. This product is distributed "AS-IS" without warranties of any kind, either expressed or implied, including but not limited to warranties of suitability to a particular purpose or use. No attempt has been made in either the design or production of these data to define the limits or jurisdiction of any federal, state, or local government. These data are intended for use only at the published scale or smaller and are for reference purposes only. They are not to be construed as a legal document or survey instrument. A detailed on-the-ground survey and historical analysis of a single site may differ from these data.
CREDIT:
It is requested that the dataset be cited in any products generated from this data. The following source citation should be included: [Soils_SSURGO_USDA_IN: Soil Survey Geographic (SSURGO) Database for Indiana, 2012 (U.S. Department of Agriculture, 1:12,000, SDE Polygon Feature Class)].
WARRANTY:
Indiana University, Indiana Geological Survey warrants that the media on which this product is stored will be free from defect in materials and workmanship for ninety (90) days from the date of acquisition. If such a defect is found, return the media to Publication Sales, Indiana Geological Survey, 611 North Walnut Grove, Bloomington, Indiana 47405 2208, and it will be replaced free of charge.
LIMITATION OF WARRANTIES AND LIABILITY:
Except for the expressed warranty above, the product is provided "AS IS", without any other warranties or conditions, expressed or implied, including, but not limited to, warranties for product quality, or suitability to a particular purpose or use. The risk or liability resulting from the use of this product is assumed by the user. Indiana University, Indiana Geological Survey shares no liability with product users indirect, incidental, special, or consequential damages whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or economic loss. Indiana University, Indiana Geological Survey is not responsible for claims by a third party. The maximum aggregate liability to the original purchaser shall not exceed the amount paid by you for the product.
"The attribute accuracy is tested by manual comparison of the source with hard copy plots and/or symbolized display of the map data on an interactive computer graphic system. Selected attributes that cannot be visually verified on plots or on screen are interactively queried and verified on screen. In addition, the attributes are tested against a master set of valid attributes. All attribute data conform to the attribute codes in the signed classification and correlation document and amendment(s)."
"Certain node/geometry and topology GT- polygon/chain relationships are collected or generated to satisfy topological requirements (the GT-polygon corresponds to the soil delineation). Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout, and the chains representing the limits of the file are free of gaps. The tests of logical consistency are performed using vendor software. All internal polygons are tested for closure with vendor software and are checked on hard copy plots. All data are checked for common soil lines (i.e., adjacent polygons with the same label). Edge locations generally do not deviate from centerline to centerline by more than 0.01 inch.
"The Soil Survey of Adams County, Indiana is edge matched to the adjacent SSURGO certified Soil Surveys of Allen County, Indiana, Van Wert County, Ohio and Mercer County, Ohio. The soil labels in Adams County do not match the labels in the adjacent surveys. Most of the feature edges in Adams County do not match the feature edges in the adjacent surveys. The soil survey boundary for Adams County matches the Indiana county boundary coverage that is archived at the Soil Data Mart. The soil survey area boundaries match."
"A map unit is a collection of areas defined and named in terms of their soil components or miscellaneous areas or both. Each map unit differs in some respect from all others in a survey area and each map unit has a symbol that uniquely identifies the map unit on a soil map. Each individual area, point, or line so identified on the map is a delineation.
"Soil Scientists identify small areas of soils or miscellaneous areas that have properties and behavior significantly different than the named soils in the surrounding map unit. These minor components may be indicated as special features. If they have a minimal effect on use and management, or could not be precisely located, they may not be indicated on the map.
"A map unit has specified kinds of soils or miscellaneous areas (map unit components), each with a designated range in proportionate extent. Map units include one or more kinds of soil or miscellaneous area. Miscellaneous areas are areas that have little or no recognizable soil.
"Specific National Cooperative Soil Survey standards and procedures were used in the classification of soils, design and name of map units, and location of special soil features. These standards are outlined in Agricultural Handbook 18, Soil Survey Manual, 1993, USDA, NRCS; Agricultural Handbook 436, Soil Taxonomy, 1995, USDA, NRCS; and all Amendments; Keys to Soil Taxonomy, (current issue) USDA, NRCS; National Soil Survey Handbook, title 430-VI,(current issue) USDA, NRCS.
"The actual composition and interpretive purity of the map unit delineations were based on data collected by scientists during the course of preparing the soil maps. Adherence to National Cooperative Soil Survey standards and procedures is based on peer review, quality control, and quality assurance. Quality control is outlined in the memorandum of understanding for the soil survey area and in documents that reside with the Natural Resources Conservation Service state soil scientist. Four kinds of map units are used in soil surveys: consociations, complexes, associations, and undifferentiated groups.
"Consociations - Consociations are named for the dominant soil. In a consociation, delineated areas use a single name from the dominant component in the map unit. Dissimilar components are minor in extent. The soil component in a consociation may be identified at any taxonomic level. Soil series is the lowest taxonomic level. A consociation that is named as a miscellaneous area is dominantly that kind of area and minor components do not significantly affect the use of the map unit. The total amount of dissimilar inclusions of other components in a map unit generally does not exceed about 15 percent if limiting and 25 percent if nonlimiting. A single component of a dissimilar limiting inclusion generally does not exceed 10 percent if very contrasting.
"Complexes and associations - Complexes and associations consist of two or more dissimilar components that occur in a regularly repeating pattern. The total amount of other dissimilar components is minor extent. The following arbitrary rule determines whether complex or association is used in the name. The major components of an association can be separated at the scale of mapping. In either case, because the major components are sufficiently different in morphology or behavior, the map unit cannot be called a consociation. In each delineation of a complex or an association, each major component is normally present though their proportions may vary appreciably from one delineation to another. The total amount of inclusions in a map unit that are dissimilar to any of the major components does not exceed 15 percent if limiting and 25 percent if nonlimiting. A single kind of dissimilar limiting inclusion usually does not exceed 10 percent.
"Undifferentiated groups - Undifferentiated groups consist of two or more components that are not consistently associated geographically and, therefore, do not always occur together in the same map delineation. These components are included in the same named map unit because their use and management are the same or very similar for common uses. Generally they are grouped together because some common feature, such as steepness, stoniness, or flooding, determines their use and management. If two or more additional map units would serve no useful purpose, they may be included in the same unit. Each delineation has at least one of the major components, and some may have all of them. The same principles regarding the proportion of minor components that apply to consociations also apply to undifferentiated groups. The same principles regarding proportion of inclusion apply to undifferentiated groups as to consociations.
"Minimum documentation consists of three complete soil profile descriptions that are collected for each soil added to the legend, one additional per 3,000 acres mapped; three 10 observation transects for each map unit, one additional 10 point transect per 3,000 acres.
"A defined standard or level of confidence in the interpretive purity of the map unit delineations is attained by adjusting the kind and intensity of field investigations. Field investigations and data collection are carried out in sufficient detail to name map units and to identify accurately and consistently areas of about 2.5 acres."
"The accuracy of these digital data is based upon their compilation to base maps that meet National Map Accuracy Standards at a scale of 1 inch equals 1,000 feet. The difference in positional accuracy between the soil boundaries and special soil features locations in the field and their digitized map locations is unknown. The locational accuracy of soil delineations on the ground varies with the transition between map units.
"For example, on long gently sloping landscapes the transition occurs gradually over many feet. Where landscapes change abruptly from steep to level, the transition will be very narrow. Soil delineation boundaries and special soil features generally were digitized within 0.01 inch of their locations on the digitizing source. The digital map elements are edge matched between data sets. The data along each quadrangle edge are matched against the data for the adjacent quadrangle. Edge locations generally do not deviate from centerline to centerline by more than 0.01 inch."
For each county, the respective shapefile entitled "soilmu_a_in[COUNTY NAME].shp" was used as the feature dataset. Selected attributes from the associated tabular data file "muaggatt.txt" were joined to the attribute table of the soil map units using "Musym" as the join field.
The revised shapefile was saved as "SSURGO_IN[COUNTY NAME].SHP"
An SDE polygon feature class named "Soils_SSURGO_USDA_IN" was created, and ESRI ArcCatalog was used to load the shapefiles ("SSURGO_IN[COUNTY NAME].SHP") for all 92 counties in Indiana.
"Map Unit Delineations are closed polygons that may be dominated by a single soil or miscellaneous area component plus allowable similar or dissimilar soils, or they can be geographic mixtures of groups of soils or soils and miscellaneous areas.
"The map unit symbol uniquely identifies each closed map unit delineation. Each symbol corresponds to a map unit name. The map unit key is used to link to information in the National Soil Information System tables.
"Map Unit Delineations are described by the National Soil Information System database. This attribute database gives the proportionate extent of the component soils and the properties for each soil. The database contains both estimated and measured data on the physical and chemical soil properties and soil interpretations for engineering, water management, recreation, agronomic, woodland, range, and wildlife uses of the soil.
"The National Soil Information System database contains static metadata. It documents the data structure and includes such information as what tables, columns, indexes, and relationships are defined as well as a variety of attributes of each of these database objects. Attributes include table and column descriptions and detailed domain information.
"The National Soil Information System database also contains a distribution metadata. It records the criteria used for selecting map units and components for inclusion in the set of distributed data.
"Special features are described in the feature table. It includes an area symbol, feature label, feature name, and feature description for each special and ad hoc feature in the survey area."
Keys to Soil Taxonomy (current issue), USDA, SCS.
National Soil Survey Handbook, Title 430-VI, part 647 (current issue), USDA, NRCS.
Agricultural Handbook 18, Soil Survey Manual, 1993, USDA, SCS.
It is requested that the dataset be cited in any products generated from this data. The following source citation should be included: [Soils_SSURGO_USDA_IN: Soil Survey Geographic (SSURGO) Database for Indiana, 2012 (U.S. Department of Agriculture, 1:12,000, SDE Polygon Feature Class)].
WARRANTY:
Indiana University, Indiana Geological Survey warrants that the media on which this product is stored will be free from defect in materials and workmanship for ninety (90) days from the date of acquisition. If such a defect is found, return the media to Publication Sales, Indiana Geological Survey, 611 North Walnut Grove, Bloomington, Indiana 47405 2208, and it will be replaced free of charge.
LIMITATION OF WARRANTIES AND LIABILITY:
Except for the expressed warranty above, the product is provided "AS IS", without any other warranties or conditions, expressed or implied, including, but not limited to, warranties for product quality, or suitability to a particular purpose or use. The risk or liability resulting from the use of this product is assumed by the user. Indiana University, Indiana Geological Survey shares no liability with product users indirect, incidental, special, or consequential damages whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or economic loss. Indiana University, Indiana Geological Survey is not responsible for claims by a third party. The maximum aggregate liability to the original purchaser shall not exceed the amount paid by you for the product.